|
|
|
Features
|
- The CT1's double spindle design allows for the cutting of complex parts in a single setup, and coupled with a 16-station turret.
- When the Y-Axis turret is in the upper position, it can complete machining on parts in the main or sub spindle. In addition, tools can be placed facing either the main or sub spindle.
- The special structural design uses a 90° angle for the turret carriage so you maintain superb rigidity and stability in machining. Additionally, this allows you to use a simpler controller specification, reducing programming complexity and saving you money at the same time.
- The servo turrets are designed and built by CC Machinery especially for the CT series. This ensures maximum accuracy during machining, along with super fine finishes.
|
|
|
|
|
ITEM |
CT1-76 |
Control Unit |
Controller |
MITSUBISHI |
FANUC |
Capacity |
Max. Turning Dia. |
Ø325 mm |
Standard Turning Dia. |
Ø210 mm |
Max. Turning Length |
560 mm |
Axis Specifications |
X1 / Y1 / Z1-Axis Travel |
225 mm / ±50 mm / 636 mm |
X1 / Y1 / Z1-Axis Motor |
2.2 kW |
2.7 kW |
X1 / Y1 / Z1-Axis Rapid Travel Speed |
16 / 6 /40 m/min |
B-Axis Travel |
690.5 mm |
B-Axis Motor |
2.2 kw |
2.7 kw |
B-Axis Rapid Travel Speed |
40 m/min |
Min. Input Unit |
0.001 mm |
Spindle |
Max. Bar Feeding Dia. |
Ø76 mm |
Spindle Motor |
15 / 22 kw |
18 / 22 kw |
Max. Spindle Speed |
4000 rpm |
Spindle Nose |
A2-6 |
Chuck Size |
8" |
Sub Spindle |
Max. Bar Feeding Dia. |
Ø65 mm |
Spindle Motor |
7.5 / 11 kW |
18 / 22 kW |
Max. Sub Spindle Speed |
4000 rpm |
Spindle Nose |
A2-6 |
Chuck Size |
8" |
L, R, C |
Min. Moving Unit |
0.001° |
C-Axis Rapid Travel Rate |
600 min-1 |
Live Tooling Turret |
O.D Turning Tool Size |
25 mm |
I.D Turning Tool Size |
Ø25 mm |
Rotating Mode |
Single Tool Transmission |
Live Tooling rpm |
60~6000 min-1 |
Live Tooling Motor |
3.7 / 5.5 kW |
4.5 kW |
Collet Size |
ERØ32 |
Tool Holder & Tool Size |
BMT65 |
Hydraulic |
Hydraulic Motor |
5HP / 3.7 kW |
Coolant Pump |
Spindle Coolant Pump |
1 HP / 0.75 kW |
Turret Coolant Motor |
1 HP / 0.75 kW |
Chip Flush Pump |
1 HP / 0.75 kW |
Sub Spindle Internal Coolant Pump |
1 HP / 0.75 kW |
Tank Capacity |
Hydraulic Tank |
45 L |
Coolant Tank |
325 L |
Machine |
Machine Size (L x W x H) (Includes Chip Conveyor) |
4779 x 2086 x 2061 mm |
Machine N.W. (Includes Chip Conveyor) |
8000 kg |
|
| |
|
|
|
|
|
Automatic comprehensive quality control system ensures that excellent quality level, and the precise inspection instruments provide the dependable assurance for quality products. |
| |
|