Model |
Description |
AX-320 |
AX-450 |
Table |
Table size |
Dia. 320 mm (12.6") |
Dia. 450 mm (17.72") |
Travel ranges (X/Y/Z) |
660 x 610 x 610 mm
(25.98x24.02x24.02") |
760 x 610 x 560 mm
(29.92x24.02x22.05") |
T slot size |
12 mm x 90º
(0.47" x 90°) |
14 mm x 45º
(0.55" x 45°) |
Max. table load |
150 / 150 kgs |
300 / 250 kgs |
Max. workpiece size(WxH) |
Dia. 420 x 300 mm (16.54 x 11.81") |
Dia. 600 x 300 mm (23.62 x 11.81") |
Diameter of table hole |
50 mm (1.97") |
171 mm (6.73") |
Spindle nose to table surface |
50 ~ 605 mm
(1.97 ~ 23.82") |
50 ~ 565 mm
(1.97 ~ 22.24") |
A axis, tilt(deg) / (0.001º) |
150º (-120º / +30º) |
220º (±110º) |
C axis, rotary(deg) / (0.001º) |
360º |
Spindle |
Tool shank & pull stud |
ISO 40 |
Spindle inner diameter |
70 mm (2.76") |
Spindle speed direct drive |
10000 rpm |
Spindle speed built-in |
15000 rpm |
Main motor (con/30min) |
9 / 12 kW |
Axis Servo Motor |
Rapid feed rate (X/Y/Z) |
30 / 30 / 24 M/min. |
Feed rate (X/Y/Z) |
10000 mm/min. |
Feed rate (A/C) |
5.5 / 11.5 rev/min. |
X axis rated torque |
10 Nm |
Y axis rated torque |
10 Nm |
Z axis rated torque |
10 Nm |
A axis rated torque |
5 Nm |
10 Nm |
C axis rated torque |
3.8 Nm |
10 Nm |
Auto Tool Changer |
ATC type |
DISK / CHAIN (Opt.) |
CAM type |
ARM |
Tool selection (Bi-direction) |
RANDOM |
Tool storage capacity |
24 pcs / 30, 40 pcs(Opt.) |
Max. tool diameter |
90 mm (3.54") / 76 mm (2.99") (Opt.) |
Max. tool Length |
300 |
Max. tool weight |
8 |
Miscellaneous |
Air requirement |
6 kg/cm² |
Hydraulic requirement |
40 kg/cm², 30 L |
Power requirement |
40 KVA |
Coolant tank capacity |
300 L |
Machine weight |
6500 kgs |
7000 kgs |
Machine height |
2900 mm (114.17") |
Floor space (LxW) |
2660 x 2230 mm
(104.72 x 87.8") |
3100 x 2230 mm
(122.05 x 87.8") |
Packing size (LxWxH) |
2660x2230x2560mm
(104.72x87.8x100.79") |
3100x2230x2560 mm
(122.05x87.8x100.79") |