| ITEM |
MV-1060 |
| Table |
Dimension |
1180 x 560 (46.5 x 22.0) |
| Working Area |
1060 x 620 (41.7 x 24.4) |
| T-Slot |
CD125 x 18 x 4 (CD4.9 x 0.7 x 4) |
| Max. Loading Capacity |
1000 kg ( 2200 lbs ) |
| Travel Range |
Max. Travel Range Of
X / Y / Z - Axis |
1060 / 620 / 620 (41.7 x 24.4 x 24.4) |
| Distance From Spindle Nose To Table Surface |
150 - 770 (5.9 - 30.3) |
| Distance From Spindle Center To Column |
680 (26.8) |
| Spindle |
Spindle Taper |
ISO No.40 |
| Spindle Nose Outer Diameter |
 70 ( 2.8) |
| Spindle Speed |
STD: 10000 rpm; OPT: 6000, 12000 rpm |
| Feedrate |
Feedrate Of
X / Y / Z - Axis |
1 - 6000 mm / min (0.04 - 236.2 ipm) |
Slideways Of
X / Y / Z - Axis |
Linear Guideway |
Rapid Traverse Of
X / Y / Z - Axis |
 Type: 30 m / min (1181 ipm)
 Type: 20 m / min (787 ipm) |
| Tool Magazine |
Tool Capacity |
STD: 24 pcs; OPT: 30 pcs |
| Tool Selection |
Bi - Direction & The Shortest Selection |
| Max. Adjacent Tool Diameter x Length |
80 × 250 ( 3.15 × 9.84) |
| Max. Tool Weight |
6 kg (13.2 lbs) |
| Tool Shank |
BT40 or V40 CT or V40 ANSI |
| Drive Motor |
Spindle Drive Motor |
STD: 11 / 15 kW (15 / 20 HP)
OPT: 15 / 18.5 kW (20 / 25 HP) |
Servo Motors Of
X
/ Y / Z - Axis |
Motor: 3.0 kW (4 HP)
Motor: 2.5 kW (3.4 HP) |
| Coolant Motor |
960 W (1.2 HP) |
| Chip Conveyor Motor |
215 W (1 / 4 HP) |
| Accuracy |
Positioning |
 0.005 |
| Repeatability |
0.003 |
| Miscellaneous |
Power Requirement |
208 - 220V / 75 Amps / 3 Phase |
Packing Dimension
(W x D x H) |
3010 x 2310 x 2550 (118.5 x 90.9 x 100.4) |
| Net Weight
(Approx.) |
6130 kgs (13486 lbs) |
| Gross Weight
(Approx.) |
6980 kgs (15356 lbs) |
