DESCRIPTION |
QP2040 |
| Table |
Table Size |
1200 x 510mm (47.2" x 20" ) |
T-Slots (No. x W x Dis.) |
5 x 18mm x 100mm |
Table Load |
600kg |
Travel |
X Travel |
1020mm (40.2" ) |
| Y Travel |
530mm (20.9") |
| Z Travel |
510mm (20") |
| Spindle |
Spindle Nose To Table |
150-660mm |
Spindle Center To Column |
570mm (22.4") |
| Spindle Surface To Ground |
850mm (33.4") |
| Spindle Taper |
#40 |
| Spindle Speed |
Belt drive 80-8000rpm (Opt. 10000, 12000rpm)
(Opt. Direct drive : 12000rpm, 15000rpm) |
Spindle Diameter |
70mm |
Feed Rates |
Rapid on (X / Y / Z) Axes |
24 / 24 / 20 m / min.
|
Cutting Feed Rate |
1-10000 mm / min. |
| Diameter & Pitch of Ballscrew |
40mm, P10 |
| Accuracy |
VDI3441 (JIS B6338) |
Positioning |
P0.014mm ( 0.004mm / 300mm)
|
Repeatability |
PS0.010 ( 0.003mm) |
| Tool Changer |
Tool Capacity |
Arm: 24, (Opt. Carousel: 20) |
| Changer Time |
Arm: T-T 1.5 sec, C-C 4.35 sec |
Tool Shank |
BT40 or CT40 |
Pull Stud |
P40T-1 |
Max. Tool Diameter (With Adjacent Tool ) |
76mm |
Max. Tool Diameter (Without Adjacent ) |
120mm |
| Max. Tool Weight |
7kg |
Motor |
| Spindle Motor |
(F) Belt drive 7.5 / 11kW (cont. / 15min)
(S) Belt drive 9 / 12kW
(H) Belt drive 7.5 / 13kW |
Drive Motor (X,Y,Z) |
(F) 1.8 / 1.8 / 2.5kW (Opt. 3.0 / 3.0 / 4.0kW)
(S) 3.3 / 3.3 / 3.5kW
(H) 3.5 / 3.5 / 5.7kW
|
Coolant Pump |
1 HP |
| General |
Power Required |
15KVA |
Air Required |
5.5 kg / cm2 , 200 L / min |
Floor Space (W x D x H) |
2800 x 2115 x 2590mm (108.2" x 81" x 101.6" )
|
Machine Net Weight, approx |
6000kg |
VIDEO
