DESCRIPTION |
3072VMC |
| Table |
Table Size |
78.7" x 28.5" (2000 x 800 mm) |
T-Slots (No. x W x Dis.) |
6" x 0.709" x 4.92" (6 x 18
mm x 125 mm) |
Table Load |
5500 lbs (2500 kg) |
Travel |
X Travel |
72.8" (1850 mm) |
| Y Travel |
31.5" (800 mm) |
| Z Travel |
30" (762 mm) |
Spindle |
| Spindle Nose to Table |
7.1"~37.1" (180~942 mm) |
Spindle Center To Column |
33.5" (850 mm) |
| Spindle Taper |
(#50) |
Spindle Speed |
Belt drive: 60~6000 rpm, (Opt. Belt drive: 8000 rpm,
Gear drive: 40~4000 rpm or 6000 rpm |
Spindle Diameter |
Belt drive: 3.5" (90 mm)
Gear drive: 3.9" (100 mm) |
Feed Rates |
Rapid on (X / Y / Z) Axes |
590/590/472 IPM (15 / 15 / 12 m / min) |
Cutting Feed Rate |
0.04~300 IPM (1~5000 mm / min) |
Diameter & Pitch of ballscrew |
1.9" (50 mm), P10 |
| Accuracy |
Positioning |
VDI 3441 P 0.008 mm |
Repeatability |
VDI 3441 PS 0.006 mm |
| Tool Changer |
Tool Capacity |
Arm: 24; (Opt. Arm: 32) |
Changer Time |
Arm: T-T 5 sec, C-C 8 sec |
Tool Shank |
BT50, CT50 or DIN50 |
Pull Stud |
P40T-1 |
Max. Tool Diameter |
24 station cam-arm type: 4.3" (110 mm)
32 station cam-arm type: 5" (127 mm) |
| Max. Tool Legth |
11.8" (300 mm) |
| Max. Tool Weight |
33 lbs (15 kgs) |
Motor |
Spindle Motor
|
Belt drive:
 P22i (20 HP Wide range)
Gear drive:
18i (30 HP) |
Drive Motor (X,Y,Z) |
4.0 kW |
Coolant Pump |
1 / 2 HP (0.37 kw) |
General |
Power Required |
38 KVA |
Air Required |
80 PSI, 5kg / cm2, 200 L / min |
Floor Space (W x D x H) |
117.3" x 200" x 122.4"
(2980 x 5070 x 3108 mm)
|
Machine Net Weight, approx |
31900 lbs (14500 kg) |
