| ITEM |
PLG-52Y |
| Max. Turning Dia. |
52 mm |
| Max. Machining Length |
Bar diameter x 3 |
| Swing |
200 mm |
| X Axis |
190 mm |
| Z Axis |
300 mm |
| Y Axis |
300 mm |
| Spindle Hole |
60 mm |
| Bar Capacity |
52 mm |
| Spindle Nose |
A2-6 |
| Collet Type |
177E or 185E / 52 mm |
| Spindle Motor |
7.5 kw / 10 h.p. |
| X, Z, Y Axis Motor |
1 kw |
| Cross Spindle Driven Tools Motor |
0.75 kw |
| Front Off-Center Driven Tools Motor |
0.75 kw |
| Spindle Speed (rpm) |
100 ~ 4000 r.p.m. |
| Cross Spindle Speed |
200 ~ 5000 rpm |
| Front Off-Center Driven Tool Speed |
200 ~ 5000 rpm |
| Rapid Traverse Speed (X, Z, Y Axis) |
16 M/MIN |
| Min. Input Unit |
0.001 mm |
| O.D. Tooling |
5 |
| O.D. Tool Dimension |
 20 x 20 x 110 |
| I.D. Tooling |
4 |
| I.D. Tool Dimension |
 25 mm |
| I.D. Tool Max. Drilling Dia. |
25 mm |
| I.D. Tool Max. Tapping Dia. |
M16 |
| Cross Driven Tooling |
4 |
| Cross Driven Tooling Dimension |
16 mm (ER25) |
| Cross Driven Tool Max. Drilling Dia. |
16 mm |
| Cross Driven Tool Max. Tapping Dia. |
M10 |
| Front Off-Center Driven Tooling |
4 |
| Front Off-Center Driven Tool Dimension |
16 mm (ER25) |
| Front Off-Center Driven Tool Max. Drilling Dia. |
16 mm |
| Front Off-Center Driven Tool Max. Tapping Dia. |
M10 |
| High Pressure Coolant Pump |
1 H.P. |
| Hydraulic Pump |
1 HP |
| Dimension |
2490 x 1690 x 1955 mm |
| Weight |
3000 kgs |
VIDEO
