| MODEL |
DESCRIPTION |
TNC660A |
TNC770A |
TNC890A |
| Capacity |
Swing Over Bed |
660 mm (26") |
770 mm (30.3") |
900 mm (35.4") |
Swing Over Cross Slide |
360 mm (14.2") |
470 mm (18.5") |
600 mm (23.6") |
Center Height |
325 mm (12.8") |
380 mm (15") |
445 (17.5") |
Distance Between Center |
1500 mm (60"), 2000 mm (80"), 3000 mm (120"),
4000 mm (157"), 5000 mm (196") |
Bed Width |
480 mm (18.9") |
| Spindle |
Spindle Nose
Spindle Speeds (4 Steps) |
A1 - 11 or D1 - 11 |
H1: 541 - 1200 rpm.
H2: 166 - 540 rpm.
L1: 76 - 165 rpm.
L2: 25 - 75 rpm. |
Spindle Bore |
104 mm (4") / 155 mm (6") 230 mm (9") (OPT) |
Chuck Size |
12" / 15" (OPT) |
| Turret |
Longitudinal Travel (Z Axis) |
1305 mm (51.4"), 1800 mm (70.8"),
2800 mm (110.2"), 3800 mm (49.61"),
4800 mm (188.98") |
Crosslide Travel (X Axis) |
400 mm (15.7") |
Topslide Width |
280 mm (11") |
Size Of Toolpost Shank |
32 mm x 32 mm (1.3" x 1.3") |
X Axis Rapid Travel |
5 M/min. (200 ipm) |
Z Axis Rapid Travel |
10 M/min. (400 ipm) |
| Tailstock |
Tailstock Diameter |
105 mm (4.1") |
Tailstock Travel |
150 mm (6") |
Tailstock Taper |
MT 6 |
| Motor |
Spindle Motor |
20 HP / 25 HP (OPT) |
Drives (X, Z) |
AC SERVO |
Range Of Feeds In Manual Mode |
0.01 - 500 m/rev.
(0.0004 - 19.68 in/rev.) |
Coolant Pump Motor |
1/8 HP |
| Machine Weight |
Machine Weight |
5000 kgs (11000 lbs), 5500 kgs (12100 lbs),
6500 kgs (14300 lbs), 7500 kgs (16500 lbs),
8500 kgs (18700 lbs) |
