| MODEL |
UNIT |
THC-130NC |
| Cutting Capacity |
- |
TCT CARBIDE SAWBLADE |
HSS SAWBLADE |
| Round Solid Bar |
mm |
 25 ~ 101 (130 opt.) |
25 ~ 110 |
| Square Solid Bar |
mm |
 25 ~ 76 |
25 ~ 100 |
| Rectangle |
mm |
 25 ~ 76 |
 25 ~ 100 |
| Round Pipe |
mm |
- |
 25 ~ 130 |
| Square Pipe |
mm |
- |
 25 ~ 110 |
| Maximum Length Of Head Cut |
mm |
10 ~ 50 |
| Waste Material Length At Tail End |
mm |
85 ~ (85 +  Cutting Length) |
| Feeding Length |
mm |
5 ~ 640 Continuous cycles |
| Manually Stack Line-Up Loader Capacity |
kg |
3600 |
| Material Length |
mm |
3000 ~ 6000 |
| Material Loading Width |
mm |
900 |
| TCT Carbide Sawblade |
mm |
 360 x 2.25 x t 2.5 (t 2.5 ~ t 2.7) std.
425 x 2.25 x t 2.6 (t 2.5 ~ t 2.7) opt. |
| Pin Holes + Bore |
mm |
4 x 14 x PCD80 + 32 / 40 / 50 |
| Tip Aluminum Carbide Sawblade |
mm |
- |
| Pin Holes + Bore |
mm |
- |
| Hss Sawblade |
mm |
360 ~ 425 x t 2.5 ~ t 3.5 x (4 x 11 x PCD63 + 32) |
| Spindle Motor |
kw |
11 kw x 4P (15HP x 4P) |
| Spindle Speeds |
rpm |
12 ~ 120 rpm |
| Frequency Inverter |
- |
15 kw (20HP x 4P) |
| Hydraulic Pump Motor |
kw |
3.7 kw x 4P (5HP x 4P) |
| Operation Pressure |
- |
7 mpa 70 kg/cm2 |
| Oil tank Capacity |
 |
150 |
| Air Pressure |
mpa |
0.4 ~ 0.6 mpa 4 ~ 6 kg/cm2 |
| Feed Drive |
- |
AC servo-motor (1.8 kw or 2.0 kw) and precision ball screw |
| Sawhead Drive |
- |
A. Material feeding and cutting is driven by hydraulic system
B. AC servo-motor (2.9 kw or 3.5 kw) + ball screw transmission for cutting (optional) |
| Feeding Vise |
- |
Horizontal hydraulic type |
| Main Vise |
- |
Horizontal and vertical hydraulic type, one set each |
| Machine Size |
mm |
6700 x 2200 x 1900 |
| Weight (Machine + Feeder) |
kg |
3500 + 1500 |
VIDEO
