| MODEL ITEM |
W-B640 / W-B640S |
| Machining Method |
Flushing / Submerge |
| Work Tank Size (Linner) / Flushing |
1115 x 970 x 555 mm |
| Work Tank Size (Linner) / Submerge |
1000 x 922 x 575 mm |
| Max. Work Piece Size (W x D x H) / Flushing |
1040 x 775 x 350 mm |
| Max. Work Piece Size (W x D x H) / Submerge |
920 x 725 x 350 mm |
| Max. Work Piece Weight |
1000 kg |
| Work Table Size W (D) x D (W) |
874 (127) x 680 (143) mm |
| Distance From Work Table To Ground |
982 mm |
| X, Y Axis Travel |
600 x 450 mm |
| Z Axis Travel |
350 mm |
| U, V Axis Travel |
100 x 100 mm |
| Driver Motor (X, Y, Z, U, V, W) |
6 Axes AC servo motor (W-Axis is optional) |
| Max. Work Table Moving Speed |
800 mm/min |
| Wire Diameter |
Ø0.1 ~ 0.3 mm |
| A. T. W. Wire Diameter |
Ø0.1 ~ 0.3 mm (Optional) |
| Wire Tension |
200 ~ 2400 gf |
| Max. Cutting Speed (Wire Dia. Ø0.25 mm) |
180 mm2/min |
| Wire Feeding Speed |
0 ~ 15 m/min |
| Best Surface Roughens |
Ra 0.21 µm / 20 mm |
| Max. Taper Angle |
±15° (±22.5° Optional) |
| Max. Wire Bobbin Weight |
6 kg |
| Machine Weight |
3500 kg |
| Filtering Method |
Paper |
| Capacity Of Water Tank |
350L / 940L |
| Ion Exchange Resin Treatment Filter |
5L / 10L |
| Conductivity |
Automatic |
| Water Temperature Control |
Automatic (Optional) |
| Circuit Type |
Power MOS Transistor |
| On Time |
18 Steps (0.05 ~ 0.9 µ sec) |
| Off Time |
43 Steps (8 ~ 50 µ sec) |
| Max. Machining Current |
25A |
| No load Voltage |
96V / 125 V |
| Power |
AC Power |
