| MODEL |
W-A30E |
| Machining Method |
Flushing type |
| Work Tank Size (Linner) / Flushing |
790 x 730 x 480 mm |
| Max. Work Piece Size (W x D x H) / Flushing |
760 x 520 x 300 mm |
| Max. Work Piece Weight |
500 kg |
| Work Table Size W (D) x D (W) |
641 (110) x 503 (119) mm |
| Distance From Work Table To Ground |
943 mm |
| X, Y Axis Travel |
400 x 300 mm |
| Z Axis Travel |
300 mm |
| U, V Axis Travel |
100 x 100 mm |
| Driver Motor (X, Y, Z, U, V) |
5 Axes AC servo motor |
| Max. Work Table Moving Speed |
800 mm/min |
| Wire Diameter |
Ø0.1 ~ 0.3 mm |
| Wire Tension |
200 ~ 2400 gf |
| Max. Cutting Speed (Wire Dia. Ø0.25 mm) |
180 mm2/min |
| Wire Feeding Speed |
0 ~ 15 m/min |
| Best Surface Roughens |
Ra 0.21 µm / 20 mm |
| Max. Taper Angle |
±15° (±22.5° Optional) |
| Max. Wire Bobbin Weight |
6 kg |
| Machine Weight |
2000 kg |
| Filtering Method |
Paper |
| Capacity Of Water Tank |
230 L |
| Ion Exchange Resin Treatment Filter |
5 L |
| Conductivity |
Automatic |
| Water Temperature Control |
Automatic (Optional) |
| Circuit Type |
Power MOS Transistor |
| On Time |
18 Steps (0.05 ~ 0.9 µ sec) |
| Off Time |
43 Steps (8 ~ 50 µ sec) |
| Max. Machining Current |
25 A |
| No Load Voltage |
96 V / 125 V |
| Power |
AC Power |
